N260794108 |NitorLACK nitrocellulose paint blue ice metallic - 500ml can

EAN13 -51754 8430270249342
numéro d'article: N260794108
code produit: 51754

blue ice metallic - 500ml can
Blue Ice Metallic was a very rare custom colour from Fender, used in the mid 60’s mainly for Telecaster and Jazzmaster guitars and for some Stratocasters. It's an ice- blue color but with the years the tone changes to greenish due to the yellowing of the aging of the nitrocellulose. This effect can be reached by using an amber tinted clearcoat over this colour.This colour leaves no one indifferent because of its exclusivity.

Colours for vintage-inspired guitars
After great work and exhaustive study by our laboratory and technical department, we have created colours for guitars to faithfully recreate the tones of vintage Fender and Gibson guitars to paint electric guitars. They have been based on original samples from the ‘50s and ‘60s. However, keep in mind that vintage guitar colours may have changed a lot over the years due to the aging of nitrocellulose lacquer and changes in the brands’ own colours. Therefore two guitars finished in 1960 with Fender card colours can look different between them or with respect to a more current guitar today.

Nitrocellulose paint in 500ml can
If you’d like to paint your guitar a perfect finish and you have painting equipment (spray gun and compressor) available, the best choice is nitrocellulose varnish in a can. You’ll get a higher performance by a lower price and with painting equipment the final result will be professional with less effort. It is recommended to dilute the product with our solvent to adjust the viscosity. For the application to be perfect we have two types of solvents: the usual solvent used is Solvent Medium (art. nr. 48138 / N540423104), but for ambient conditions of humidity and temperature more extreme we can use Solvent Retard (art. nr. 48139 / N540425104) to avoid bubbling and blooming in the finish.

The optimal application conditions are between a temperature of 15 to 25 °C and 50 to 70% humidity. The percentage of dilution will depend on the painting equipment and its configuration but it’s recommended to use 10 to 20% solvent. The most common gun peak is 1.3 to 1.5 and the compressor pressure is about 2.5 to 3 bars.





« retour
^ Ask your question on whatsapp